Barco BlendPRO-II Instruction Manual download pdf (Page 38)

38 ScreenPRO-II Controller • User’s Guide

2. Hardware Orientation

Front Panel Sections

qçìÅÜ=pÅêÉÉå=jÉåì=pÉÅíáçå

The figure below illustrates the Touch Screen Menu Section. A sample menu is shown

for reference.

Figure 2-2. Touch Screen Menu Section

Following are descriptions of each area:

1) Softkeys

Eight un-labeled softkeys are provided — four to the left of the Touch Screen and

four below. Softkey labels (when present) appear on the Touch Screen itself.

Press the adjacent softkey to access the menu or activate the indicated function.

2) Touch Screen

On the Touch Screen, all menus and functions can be accessed in a variety of

different ways:

~ Touch the desired button on the Touch Screen itself (for example, the

{BORDR} or {SHDOW} buttons) to access the menu as indicated.

~ Press a Softkey that is directly adjacent to a button label.

~ Use the top NAV knob to move the highlight to the desired line, then use

the

ADJ rotary knob to adjust the value.

~ Touch a particular line to move the highlight to that line, then use the

ADJ rotary knob to adjust the value.

V Position

V Size < 58.9% >

452

PIP ADJUSTMENT

H Size < 37.3% > 674

TRACK SIZE

Move Rate [ 2.0 ]

Key Frame Effect [ LINEAR ]

H Position -34

------------------------------------

OPERATION:

JOY Z TO SIZE, X Y TO POSITION

2 31

1) Softkeys 2) Touch Screen 3) Rotary Knobs

Important

When adjusting parameters, there is no Enter button. If you

adjust a value with the knobs or the softkeys, that function,

parameter or value is immediately active in Preview.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 291 292

No comments

Barco BlendPRO-II Instruction Manual Page 38