Barco BlendPRO-II Instruction Manual download pdf (Page 237)

ScreenPRO-II Controller • User’s Guide 237

6. Operations

Working with Layer Functions

rëáåÖ=oÉëÉí

The Reset function is context sensitive. It is used to reset the current effect to a nominal

default value on Preview.

 Use the following steps to reset a specific PIP or Key parameter:

1. In the Layer Control Section, activate the layer that you wish to reset. The layer

button blinks to indicate that it is active.

2. Ensure that the layer is on Preview. Typically, you cannot reset functions on

Program.

3. Ensure that Freeze is off. Frozen PIPs or Keys cannot be reset.

4. If required, access the "menu" whose specific function you want to reset (e.g.,

borders, shadows, special effect, size, etc.).

5. In the Joystick Section, press Reset to reset the current effect.

rëáåÖ=gçáå=jçÇÉ

The "Join" mode enables you to lock Layer A and Layer B together, such that they move

as one. You can program "moves" when the two layers are joined, and the mode is

particularly effective when using

Cut + Fill keys. The following rules apply:

• The Split mode must be enabled in order to enter the Join mode.

• Any Layer A and Layer B effect can be joined, including PIPs and all types of

Keys. You can join two PIPs, two Keys, or one PIP and one Key.

• When the two layers are joined, the Size and Position controls on either layer

enable you to move both layers as one. The relationship of the two layers (at the

time of the joining) is maintained proportionally.

• When the two layers are joined, the effects (e.g., border, shadow, clip) on each

layer are locked — and cannot be changed until the "join" is cancelled.

• You can only enter and exit the mode when the "join" is on Preview.

 Use the following steps to join Layer A and Layer B:

1. In the Layer Control Section, ensure that Split mode is enabled.

2. On Preview, create a Key or PIP on Layer A in the normal manner.

3. Create a Key or PIP on Layer B in the normal manner.

4. Press and hold the Split button, then press either of the two layer buttons. This

action enables the "

Join" mode, and causes both layer buttons to blink.

5. Use either layer’s Size and Position controls to modify the joined layers, or to

program a "move." Note that the two layers move and size as one.

6. Transition the new "look" to program with a CUT or AUTO TRANS.

7. To exit the mode, transition the effect off Program and back to Preview.

8. Press and hold the Split button, then press either of the two layer buttons.

Reset

Note

In some situations (such as size and position), a parameter

on Program can be reset — provided that

Modify Layers on

Program

is enabled.

1 2 ... 232 233 234 235 236 237 238 239 240 241 242 ... 291 292

Comments to this Manuals

No comments

Barco BlendPRO-II Instruction Manual Page 237

Comments to this Manuals

Related products and manuals for Processors Barco BlendPRO-II