ScreenPRO-II Controller • User’s Guide 261
^K==péÉÅáÑáÅ~íáçåë
Pinouts
pÉêá~ä=`çååÉÅíçê
The figure below illustrates the ScreenPRO-II Controller serial connector, which is used for
both the
Ext Comm and Console Port connections.
Figure A-3. Serial Connector
The table below lists Serial connector pinouts.
Please note:
• The port is configured as a DCE, 115K Baud, 8 data bits, 1 stop bit, no parity bits.
• The serial port can be connected to a standard PC serial port with a straight
through DB-9 to DB-9 cable.
Table A-8. Serial Connector Pinouts
Pin RS-232 Signal Description
1 CD Carrier Detect
2 RXD Received Data
3 TXD Transmitted Data
4 DTR Data Terminal Ready
5 GND Signal Ground
6 DSR Data Set Ready
7 RTS Request To Send
8 CTS Clear To Send
9 RI Unused
51
96
Comments to this Manuals