Barco BlendPRO-II Instruction Manual download pdf (Page 248)

248 ScreenPRO-II Controller • User’s Guide

6. Operations

Working with Still Frames

~ The system will capture the "selected" layer in its current size and

position, with no borders, and with black as the background.

~ If you have two layers on Preview, only the active (selected) layer will be

captured, regardless of image priority.

5. Press {HOME} > {FRAME GRAB} to display the Frame Grab Menu.

6. On the Frame Number line, select the temporary frame store into which the still

will be captured (

FG_1, FG_2 or FG_3).

7. Press {CAPTURE}. Once pressed, the screen will indicate that the frame is being

captured. A pop-up message confirms the procedure.

8. Repeat the procedure from step 1 to capture additional stills from a layer.

Remember that you can always overwrite

FG_1, FG_2 or FG_3.

Please note:

• The captured still(s) can now be assigned as the input “type” for BG A, BG B, the

DSK or the LOGO. In Chapter 5, refer to the following sections for instructions:

~ "Background Setup," page 205.

~ "DSK Setup Procedure," page 211.

~ "LOGO Setup Procedure," page 212.

• Captured stills reside in temporary memory. If the system is powered down or

reset, the stills will be lost. To save stills in permanent memory, refer to the

Saving Still Frames in Permanent Memory" section on page 248.

p~îáåÖ=píáää=cê~ãÉë=áå=mÉêã~åÉåí=jÉãçêó

 Use the following steps to save a captured still into permanent memory.

1. Capture a still as outlined in the previous two sections.

~ "Capturing Still Frames from a Background Input" on page 247.

~ "Capturing Still Frames from a Layer" on page 247.

2. On the Frame Grab Menu, use the Frame Number line to select the frame that

you wish to save.

3. Press {SAVE} to save the captured frame into the selected storage register

(

FG_1, FG_2 or FG_3). Once pressed, the screen displays an important warning:

~ Press YES to save the frame. All front panel controls will be locked for

up to three minutes.

~ Press NO to cancel the procedure.

4. If required, press {DELETE} to delete the selected frame from permanent storage.

This button only appears when frames are stored in permanent memory.

Note

Only "saved" still frames can be named.

Warning

Do not execute the next step during live production. All

controls will be locked during the "save" process. It is

recommended that you save your stills during pre-production

as a "setup" procedure.

1 2 ... 243 244 245 246 247 248 249 250 251 252 253 ... 291 292

Comments to this Manuals

No comments

Barco BlendPRO-II Instruction Manual Page 248

Comments to this Manuals

Related products and manuals for Processors Barco BlendPRO-II