Barco BlendPRO-II Instruction Manual download pdf (Page 233)

ScreenPRO-II Controller • User’s Guide 233

6. Operations

Working with Layers

7. Many creative options are available with Cut + Fill keys. You can ...

~ Use the "Join" mode to link the cut and fill layers together, such that they

move together as one. Refer to the "

Using Join Mode" section on

page 237 for details.

~ Program a "Move" with the combined Cut + Fill effect. Refer to the

Using Move" section on page 238 for details.

~ Program a "Move" with only the key signal — such that the moving key

travels over a static fill, revealing portions of the fill as the move

progresses from point to point.

8. Transition the new look to Program with a CUT or AUTO TRANS. Refer to the

“

Working with Transitions" section on page 241 for details.

jçÇáÑóáåÖ=hÉóë

 Use the following steps to modify a Key:

1. Ensure that the Key is selected in the Layer Control Section, and active for

modification on Preview.

2. If the Key Menu is not visible, press KEY in the Layer Functions Section.

3. Key Type — Use the controls in the Key Menu to select the desired key type —

Luma, Color, or Cut + Fill. In Chapter 4, refer to the "Key Menu Functions"

section on page 156 for menu details.

4. Clip, Gain, Mode, Opacity — Use the controls in the Key Menu to adjust the

Key’s clip, gain, invert mode and opacity on Preview. In Chapter 4, refer to the

Key Menu Functions" section on page 156 for menu details.

5. Fill Source — Use the controls in the Key Menu to select a self or matte fill key.

Matte is selected, press {MATTE} to display the Matte Menu, with which you

can choose the matte fill color. In Chapter 4, refer to the "

Matte Menu" section

on page 159 for menu details.

6. Size and Position — From the Key Menu, press {SIZE & POS} to display the

Key Adjustment Menu. Use the controls to manipulate the Key on Preview. In

Chapter 4, refer to the "

Key Adjustment Menu" section on page 160 for details.

7. Crop — Press Crop (in the Joystick Section) to display the Crop Adjustment

. Select the type of crop, the aspect ratio, and the image’s H and V size. In

Chapter 4, refer to the "

Crop Menu" section on page 164 for details.

8. Source Size — Press Source (in the Joystick Section) to display the Key

Source Adjustment Menu

. Adjust the source image’s size and position within

the Key. In Chapter 4, refer to the "

Source Adjustment Menu Description"

section on page 167 for menu details.

9. Special Effects — From the Key, Key Adjustment, Key Source Adjustment or

Matte Menu, press {EFX} to display the Image Effects Menu. Select the desired

effect, including monochrome, chroma and hue, invert and strobe. In Chapter 4,

refer to the "

Image Effects Menu" section on page 153 for details.

Note

Remember that Cut + Fill keys can only be selected on

Layer B when the Split Mode is enabled.

1 2 ... 228 229 230 231 232 233 234 235 236 237 238 ... 291 292

Comments to this Manuals

No comments

Barco BlendPRO-II Instruction Manual Page 233

Comments to this Manuals

Related products and manuals for Processors Barco BlendPRO-II