182 ScreenPRO-II Controller • User’s Guide
4. Menu Orientation
LOGO Menu
ildl=jÉåì
The figure below illustrates a sample LOGO Menu:
Figure 4-76. LOGO Menu (sample)
The LOGO Menu enables you to select the full screen source for the panel’s LOGO button.
You can choose between the three internal frame stores (
FG_1, FG_2 or FG_3), or black.
Because the
LOGO is the highest priority layer and downstream of all other effects, the
“black” source can serve as a convenient way to fade all effects to black — without
changing any of the image setups underneath the
LOGO.
To access the menu:
• Press the LOGO button in the Layer Control Section.
The following
LOGO Menu functions are provided:
• Type — enables you to select still frames FG_1, FG_2, FG_3 or Black as the
LOGO source. Use the
Frame Grab Menu to capture frames. Refer to the
“
Frame Grab Menu” section on page 142 for details.
• In the Temp FG Info section:
~ File Name — displays the selected still frame’s temporary storage
register.
~ Resolution — displays the resolution of the selected still frame.
Once you have reviewed all of the sections in this chapter, please continue with Chapter 5,
“
System Setup” on page 183.
H
O
M
E
A
D
J
LOGO
Destination [ 1 ]
Temp FG1 Info:
[ FG1_T ]
File Name
Resolution
[ 1024 x 768 ]
Type
ID ALL
FG_1
N
A
V
Note
On factory reset, “black” is the default LOGO source. If you
capture a frame and assign it as the
LOGO source, that
frame will be the default upon power up.
Comments to this Manuals