BARCO Serial Communication User Manual 402
tint, write
Description :
Write a new tint value.
Command :
Command[0] \x20
Command[1] \x04
Data :
Data[0] = tint value.
Note :
This command is only active when the internal decoder is
used and the signal is NTSC.
Example :
Set the tint to 0 on a projector with address \x01.
Transmit
Start \xfe
Projector address \x01
Command[0] \x20
Command[1] \x04
Data[0] \x00
Checksum \x25
Stop \xff
Comments to this Manuals