Barco R9040320 User Manual

SIMULATION PRODUCTSGALAXY WARP™R9040320SERIAL COMMUNICATIONS BASIC USER’S MANUAL31032004 R5976614/00

1. Serial Communications Basics1.2 Data WordsmsbThe most significant byte, is the byte with the greatest weight (value).lsbThe less significant byte,

1. Serial Communications Basics1.3 Communication SettingsBaud rateDefines the speed of the data transfer. The baud rate can be set using the menu stru

1. Serial Communications Basics1.4 Serial Communications HardwareOverview• Female D9–pin connector labelled “RS232 IN” used to connect the projector w

1. Serial Communications Basics1HSKo 2HSKi 3TxD- 4GND 5RXD-6TXD+7n.c.8RXD+ 4DTR 8CTS3TxD 5GND 2RxD DINmini 8D9maleImage 1-2connection: MAC → pr

1. Serial Communications Basics1.5 Serial Communications SyntaxCharactersIn this manual, all characters are expressed using the C-Language syntax:deci

1. Serial Communications Basics’d’\x64NULL\x00Standard FilePredefined file stored in read-only memoryCustom FileFile created by the user and stored in

1. Serial Communications Basics12 R5976614 GALAXY WARP™ 31032004

2. RS232 Commands2. RS232 COMMANDSOverview• Dynacolor™, Read• Dynacolor™, Write• Dynacolor™, Off• Dynacolor™, On• Dynacolor™, Status• Dynacolor™, Exec

2. RS232 Commands2.1 Dynacolor™, ReadGeneral InformationDynaColor™ will eliminate channel-to-channel color variations. How to define color? The CIE ch

2. RS232 CommandsData [23] Measured White Y lsb ValueData [24]Desired Red x msb CoordinateData [25]Desired Red x lsb CoordinateData [26]Desired Red y

Barco nv Simulation Products600 Bellbrook Ave, Xenia OH 45385Phone: +1 (937) 372 7579Fax: +1 (937) 372 8645E-mail: [email protected] us at the web: w

2. RS232 Commands2.2 Dynacolor™, WriteDescriptionSend the Dynacolor™ values to the projector.CommandCommand [0]\xfeCommand [1]\x15Command [2]\x06DataD

2. RS232 CommandsData [29]Desired Green x lsb CoordinateData [30]Desired Green y msb CoordinateData [31]Desired Green y lsb CoordinateData [32]Desired

2. RS232 Commands2.3 Dynacolor™, OffDescriptionDisable the Dynacolor™ adjustment.CommandCommand [0]\xfdCommand [1]\x15Command [2]\x0A18 R5976614 GALAX

2. RS232 Commands2.4 Dynacolor™, OnDescriptionEnable the Dynacolor™ adjustment.CommandCommand [0]\xfdCommand [1]\x15Command [2]\x09R5976614 GALAXY WAR

2. RS232 Commands2.5 Dynacolor™, StatusDescriptionRead the current status of the Dynacolor™ adjustment.CommandCommand [0]\xfdCommand [1]\x15Command [2

2. RS232 Commands2.6 Dynacolor™, Execute LinkedDescriptionThis will execute the Linked Dynacolor™ command, all projectors in the linked setup will be

2. RS232 Commands22 R5976614 GALAXY WARP™ 31032004

IndexINDEXCCommunication Settings 7DData 6Words 6Dynacolor™ 14, 16, 18–21Execute Linked 21Off 18On 19Read 14Status 20Write Default 16RRS232 Commands 1

Index24 R5976614 GALAXY WARP™ 31032004

Revision SheetTo:Barco nv Simulation ProductsNoordlaan 5, B-8520 KuurnePhone: +32 56.36.82.11, Fax: +32 56.36.84.86E-mail: [email protected], Web: www.ba

Copyright ©All rights reserved. No part of this document may be copied, reproduced or translated. It shall not otherwise be recorded, transmitted orst

Table of contentsTABLE OF CONTENTS1. Serial Communications Basics...

Table of contents2 R5976614 GALAXY WARP™ 31032004

1. Serial Communications Basics1. SERIAL COMMUNICATIONS BASICSOverview• Serial Communications Protocol• Data Words• Communication Settings• Serial Com

1. Serial Communications Basics1.1 Serial Communications ProtocolCommunication Protocol SummaryLike every communication method the serial communicatio

1. Serial Communications BasicsNoteAny command byte, data byte or checksum byte that equals \x80, \xfe, \xff has to be converted!1. Transmission- inst