BARCO Serial Communication User Manual 112
clamp edge, write leading
Description :
Set the clamp edge to leading.
Command :
Command[0] \x26
Command[1] \x66
Data :
No data bytes.
Example :
Set the clamp edge to leading on a projector with address
\x01.
Transmit
Start \xfe
Projector address \x01
Command[0] \x26
Command[1] \x66
Checksum \x8d
Stop \xff
Receive (acknowledge)
Start \xfe
Projector address \x01
Command[0] \x00
Command[1] \x06
Checksum \x07
Stop \xff
Comments to this Manuals