BARCO Serial Communication User Manual 218
interlaced, write off
Description :
Tell the projector the signal applied is not interlaced.
Command :
Command[0] \x26
Command[1] \x60
Data :
No data bytes.
Example :
Define the signal as not interlaced on a projector with
address \x01.
Transmit
Start \xfe
Projector address \x01
Command[0] \x26
Command[1] \x60
Checksum \x87
Stop \xff
Receive (acknowledge)
Start \xfe
Projector address \x01
Command[0] \x00
Command[1] \x06
Checksum \x07
Stop \xff
Comments to this Manuals