BARCO Serial Communication User Manual 290
logo, write status
Description :
Change the status of the logo (set the logo on or off).
Command :
Command[0] \xf1
Command[1] \x01
Data :
Data[0] = logo status.
Status Data[0]
Off \x00
On \x01
Example :
Set the logo on of a projector with address \x01.
Transmit
Start \xfe
Projector address \x01
Command[0] \xf1
Command[1] \x01
Data[0] \x01
Checksum \xf4
Stop \xff
Comments to this Manuals