BARCO Serial Communication User Manual 288
logo, write position
Description :
Change the position of the logo.
Command :
Command[0] \xf1
Command[1] \x04
Data :
Data[0] = horizontal position.
Data[1] = vertical position.
Example :
Set the logo position to (1, 1) of a projector with address
\x01.
Transmit
Start \xfe
Projector address \x01
Command[0] \xf1
Command[1] \x04
Data[0] \x01
Data[1] \x01
Checksum \xf8
Stop \xff
Comments to this Manuals