Barco ScreenPRO-II Instruction Manual download pdf (Page 133)

ScreenPRO-II • User’s Guide 121

6. Operations

Working with Layers

_~ÅâÖêçìåÇ=qê~åëáíáçåë

 Use the following steps to perform a background transition:

1. To transition from one background to another, press and light the background

button to which you want to transition. The button blinks to indicate it is selected

and active for modification on Preview. Please note:

~ If the background is already on Program, the Background Input Setup

appears, but changes cannot be made.

~ If the background is not on Program, the Background Input Setup

appears and the background "type" can be changed.

2. With the background button blinking and active for modification, select the type of

background to which you want to transition. Scroll to the

Type line:

~ Select DVI to use an unscaled full-screen graphic.

~ Select MATTE to use a solid color. If the color has not already been set

up, press {

MATTE} to display the Background Matte Menu, and adjust

the color as required. In Chapter 4, refer to the "

Background Matte

Menu" section on page 87 for details.

~ Select FG_1, FG_2 or FG_3 to use a captured still frame as the

background source. Refer to the "

Capturing Still Frames" section on

page 137 for details.

3. Select the desired background toggle mode. Press {HOME} > {SYSTEM} to

display the

System Menu. Scroll to the Toggle line and adjust as required:

~ Enable toggle mode to toggle between the last two selected

backgrounds on each transition.

~ Disable toggle mode to retain the last selected background on the next

transition.

4. Perform the desired transition (WIPE, CUT or MIX) in the normal manner.

Please note the following important points regarding background transitions:

• If BG A is on Program and BG A is selected in Preview, there will be no change of

backgrounds on the next transition. The similar situation is true for

BG B.

• If BG A is on Program and BG B is selected in Preview, BG A will transition to BG

on the next CUT, WIPE or MIX.

Note

If you select Background B and a pop-up window alerts you

to a resource conflict, the

DSK is in use on Program. The

DSK must be cleared from Program before Background B

can be used.

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 205 206

Comments to this Manuals

No comments

Barco ScreenPRO-II Instruction Manual Page 133

Comments to this Manuals

Related products and manuals for TVs & monitors Barco ScreenPRO-II