Barco ScreenPRO-II Instruction Manual download pdf (Page 104)

92 ScreenPRO-II • User’s Guide

4. Menu Orientation

DSK Adjustment Menu

• Press {MATTE} to display the DSK Matte Adjustment Menu. This softkey only

appears when the

Fill Source is set to Matte. Refer to the “DSK Matte

Adjustment Menu” section on page 94 for details.

aph=fåéìí=pÉíìé=jÉåì

From the DSK Adjustment Menu, press {INPUT SETUP} to display the DSK Input Setup

, a sample of which is shown below:

Figure 4-49. DSK Input Setup Menu (sample)

The DSK Input Setup Menu enables you to set the type of input used for the DSK. The

following functions are provided:

• DSK Input — the legend [B] indicates that the Background B DVI input is

assigned to the DSK.

• Type — sets the type of DSK.

~ When None is selected, the DSK is disabled.

~ When DVI is selected, the DVI input video is selected as supplied from a

computer or other source. In this mode, you may also choose to grab a

still frame. Ensure that the desired source is connected to the rear

panel’s

BG/DSK B input.

~ When FG_1, FG_2, or FG_3 is selected, one of the three internal frame

stores is the DSK’s input.

• Format — this line performs two functions:

~ Displays the resolution that is automatically determined by the FORCE

ACQUIRE

function.

Type DVI

DSK INPUT SETUP

DSK Input [ B ]

FORCE

ACQUIRE

V Offset [ 0 ]

SELECT

FORMAT

Format 1024 x 768 @ 59.94

Crop: H Offset [ 0 ]

FRAME

GRAB

To change EDID for BGA, BGB and

DSK, use the HOME > SYSTEM > EDID

menu.

Important

Remember that resource usage applies to DSK and BG B.

These two layers are mutually exclusive — if one is on

program, the other can not be used.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 205 206

Comments to this Manuals

No comments

Barco ScreenPRO-II Instruction Manual Page 104

Comments to this Manuals

Related products and manuals for TVs & monitors Barco ScreenPRO-II