Barco MIVD 1218 User Manual download pdf (Page 26)

User manual MIVD 1218

max Light..................This is the panel light output that corresponds

to the maximum ambient light, measured by the

ALC sensor.

min Thresh ...............This is the minimum value of ambient light.

Below this value, ALC will remain inactive.

When the measured ambient light reaches this

value, the panel light output will be set to the

min Light value.

max Thresh ..............This is the maximum value of ambient light.

Above this value, ALC will stop controlling the

light output. When the measured ambient light

reaches this value, the panel light output will be

set to the max Light value.

Scan mode

The memory of the display contains maximum 200 fixed and 28

programmable scan modes.

When you connect a video signal, the display checks in the memory

for a matching scan mode.

If it finds one, it selects the corresponding settings and parameters

from the memory. If it does not find a matching scan mode, the

display uses default settings to display the image.

When you make adjustments and save the changes, the current scan

mode is saved as programmable scan mode. If this happens while all

programmable scan modes are occupied, the oldest programmable

scan mode is overwritten automatically.

The Scan Mode menu contains the following function:

Find next mode.........Select if you wish to select another scan mode

from memory that matches the incoming video

and sync signals. The number displayed in the

OSD is the number of the actual scan mode’s

memory location.

Factory reset

Can be used to re-initialize the display.

Actual mode .............Restores all factory parameters for the current

programmable mode.

All modes..................Restores all factory parameters for all

programmable modes.

Control wheel

This function allows you to disable the control wheel function so that

the on-screen display cannot be used.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31

No comments

Barco MIVD 1218 User Manual Page 26