Barco MIVD 1218 User Manual download pdf (Page 20)

User manual MIVD 1218

Lifetime.....................Indicates the total time the display has been

operating, including the time in power-saving

mode

* Not in DVI mode

Timing information

V.Freq.......................The currently measured vertical sync frequency

H.Freq ......................The currently measured horizontal sync

frequency

Interlaced* ................Indicates if the connected video signal is

interlaced or non-interlaced. A check mark (3)

means Interlaced, a cross (2) means non-

interlaced

Inp.Clk*.....................The current dot clock frequency with which the

input signal is sampled

Lines/Frame .............The actually measured number of total lines per

frame. For interlaced signals, a frame consists

of 2 fields.

Sync*........................The kind of connected sync

* Not in DVI mode

3.6. Adjusting Geometry

The Geometry menu allows you to adjust the parameters with which

the input video signal is sampled. As a consequence, the image

geometry is influenced.

Required test pattern

To obtain good results with the Autocenter function, it is necessary to

have a good image on which to perform the adjustment.

For Autocenter, the pattern should contain:

- white or gray (min. 50%) pixels at the edges of the image (left,

right, top and bottom).

To perform the adjustments:

1 Turn the control wheel to display the Geometry menu.

2 Click the control wheel to enter the menu.

***MAIN MENU****

Geometry

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 30 31

No comments

Barco MIVD 1218 User Manual Page 20