Barco MIVD 1218 User Manual download pdf (Page 19)

User manual MIVD 1218

Note:

The calibration of the video levels determines the calibrated position

or default setting of contrast and brightness. The black level

calibration determines the brightness, the white level calibration

determines the contrast.

3.5. Getting information

The Information menu allows you to get a lot of information about the

display and the connected signals.

To read the information:

1 Turn the control wheel to display the Information menu.

2 Click the control wheel to enter the menu.

3 Turn the control wheel to select one of the categories: General or

Timing.

4 Click the control wheel to enter the selected information menu.

5 Turn the control wheel to scroll through the information.

General information

Input .........................Displays the currently selected input: analog

composite video or DVI (digital)

Current Mode ...........Displays the currently selected memory scan

mode

ALC ..........................Displays if the Ambient Light Compensation

(ALC) is on or off. A check mark (3) means on,

a cross (2) means off

Power Led ................Displays if the power LED on the front is

currently switched on or off. A check mark (3)

means on, a cross (2) means off

Interlaced* ................Indicates if the display is processing the

selected input signal in interlaced or non-

interlaced mode. A check mark (3) means

Interlaced, a cross (2) means non-interlaced

Filter*........................Displays which internal low-pass filter is

currently selected

Serial #. ....................Indicates the display serial number

SW ...........................Displays the current internal software version

***MAIN MENU****

Information

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 30 31

No comments

Barco MIVD 1218 User Manual Page 19