Barco NioWatch User Manual download pdf (Page 39)

Display installation

USB connection

The USB connection allows you to use the display as USB hub, to

which you can connect USB devices, such as a keyboard, mouse

or digital camera.

To connect the USB cable:

Figure 15

1. Connect a PC USB downstream connector to the display’s USB

upstream connector by means of a USB cable.

2. Connect any USB device to one of the display’s USB

downstream connectors.

Cable routing

Routing the signal cables

• Bind the cables in the connector compartment together with

the cable tie inside the connector compartment.

• Put the connector compartment cover back on the display.

Pay attention that the signal cables are positioned under the

bulge in the cover.

• Push the cables into the clips on the rear of the tilt & swivel

foot.

(1)

(2)

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 146 147

No comments

Barco NioWatch User Manual Page 39