Display operation
94
• switch the display in stand-by mode
To disable user controls:
1. Rotate the control wheel to display the on-screen display. The
Main Menu appears.
2. Rotate the control wheel to select Settings.
3. Press the control wheel to enter the Settings menu.
Figure 43: Settings menu
4. Rotate the control wheel to select User Controls.
5. Press the control wheel to switch from “On” to “Off”.
6. Exit the menus.
To enable user controls:
1. Do not use the control wheel for at least 3 seconds.
2. Rotate the control wheel 1 step clockwise.
3. Press the control wheel 2 times.
4. Rotate the control wheel 1 step counterclockwise. The on-screen
display appears.
Note: Steps 2 to 4 must be performed in maximum 3 seconds.
5. Rotate the control wheel to select Settings.
SETTINGS
DPMS On
Power LED On
User Controls On
EXIT
Comments to this Manuals