Barco MGP 15 Dicom Theater User Manual download pdf (Page 48)

Barco Display Tab

Display Properties

You may access the Properties page of the currently selected

display, which is represented by the monitor icon above with the

black frame around it, by either clicking on the “Properties”

button or double clicking on the icon. This screen (figure 20 on

page 49) shows properties of the currently active display.

Name: Displays the model name of the display.

Serial Number: Displays the serial number of the display.

Backlight RunTime: This is time in hours that the back light has

been on. A common question is: How much longer will the

backlight last? The backlight will typically last a very long time,

but will only be able to hold a calibrated output of for 17000

hours, after which time it will become slowly dimmer. For

displays calibrated at, an estimate of how long it will be before a

backlight replacement is needed = 17000 hours – backlight age.

Firmware Revisions: This is the runtime firmware that is loaded

in the display. This information may be helpful when there is a

problem.

Internal Temperature: This is the temperature inside the display.

It starts out at about the ambient temperature when the display

backlight is first turned on, then rises slowly to a steady-state

temperature as the display warms up. Changes in light level due

to temperature variations are completely controlled by the I-

Guard sensor on the front of the display.

Current Luminance Value: This is the current luminance value of

the display. It may vary a bit from time to time, for the display

continuously calibrates itself to meet the target luminance value.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 101 102

No comments

Barco MGP 15 Dicom Theater User Manual Page 48