Barco SLM G5 Executive Owner's Manual Page 38
- Page / 83
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
5-9
Getting Started
R5976262 BARCO SLM G5 Executive 13072001
PROJECTOR ADDRESS
001
To continue using the RCU with that specific address, it is necessary to enter the same address with the digit buttons (address between
0 and 9) within 5 seconds after pushing the address key. For example : if the Address key displays projector address 003, then
press "3" digit button on the RCU to set the RCU's address to match the projector's address. Do not press 003 digits. This will address
the remote control to '0' and control all projectors in the room.
If the address is not entered within 5 seconds, the RCU returns to its default address (zero address) and control all projectors in
the room.
How to Program an Address into the RCU ?
Press the ADDRESS key (recessed key on the RCU) with a pencil and enter the address with the digit buttons within 5 seconds after
pushing the address key. That address can be any digit between 0 and 9.
Controling the Projector
Input Selection
Key in the corresponding slot number with the digit keys on the RCU or local keypad. The selected source will be displayed.
Picture Contols
When an image control is pressed, a text box with a bar scale, icon and function name of the control, e.g. 'brightness...' appears
on the screen (only if text is ON). See example screen. The length of the bar scale and the value of the numeric indication indicate
the current memorized setting for this source. The bar scale changes as the control disc on the RCU is pressed or the + or - buttons
on the local keypad.
Brightness Control
A correct 'brightness' setting is important for good image reproduction.
Use the + button for a higher brightness.
Use the - button for a lower brightness.
Contrast Control
A correct 'contrast' setting is important for good image reproduction.
Adjust the contrast to the level you prefer, according to room lighting conditions.
Use the + button for a higher contrast.
Use the - button for lower contrast.
Color Saturation
Color saturation is only active for Video, S-Video and Component Video. Adjust the color intensity of the picture.
Use the + button for richer colors.
Use the - button for lighter colors.
Tint Control
Tint is only active for Video and S-Video when using the NTSC 4.43 or NTSC 3.58 system.
Use the + button
Use the - button.
Sharpness Control.
Use the + button for a sharper picture.
Use the - button for a softer picture.
Display the Projector Address on the Screen
Press the ADDRESS key (recessed key on the RCU) with a pencil. The projector's address will be displayed in a 'Text box'. This
text box disappears after a few seconds.
- BARCO PROJECTION SYSTEMS 1
- All rights reserved 2
- TABLE OF CONTENTS 3
- PROJECTORS 9
- Definitions 10
- Extra safety manual 10
- PACKAGING AND DIMENSIONS 11
- Packaging and Dimensions 12
- Lens Packaging 12
- Way of Packaging 12
- Projector Case 12
- Dimensions 12
- INSTALLATION GUIDELINES 13
- Installation Guidelines 14
- Projector Configurations 14
- Positioning the Projector 14
- Safety area for blow out 16
- Available lenses 17
- Cleaning the lens 19
- How to install ? 19
- CONNECTIONS 20
- Connections 22
- Input Source Connection 22
- Input facilities 22
- Fixed Slot (slot 1 & 2) 24
- Note for RCVDS05 users 25
- Connections : 26
- GETTING STARTED 30
- Getting Started 31
- Terminology 31
- Operating the Projector 32
- Switching on 32
- Lamp Run Time Indication 32
- Lamp Run Time Warning 32
- Quick Lens Adjustment 34
- Using the RCU 35
- Quick On Screen Color change 35
- Hardwired Remote Input 36
- Hardwired to the XLR Input 36
- PROJECTOR ADDRESS 38
- The Pause key 39
- The Stand-by key 39
- Menus on Local LCD Display 41
- RANDOM ACCESS ADJUSTMENT MODE 42
- Random Access Adjustment Mode 44
- Load File 44
- Start up the Load File 44
- How to load a file ? 44
- The image is not perfect ? 44
- Rename a file 47
- Start Up 47
- Copy a file 48
- Blanking 56
- What can be done ? 56
- Adjusting the blanking 56
- Aspect Ratio 57
- What can be done? 57
- Setting Up the Aspect Ratio 57
- INSTALLATION MODE 58
- Installation Mode 59
- SERVICE MODE 68
- Service Mode 69
- Identification 69
- The information 69
- Detailed description 69
- Change Password 70
- About password Types 70
- How to change the password ? 71
- Access Control List 71
- Setting up the Baud rate 73
- Available Baud rates 73
- RS422 Termination 73
- I2C Diagnosis 77
- How to select ? 77
- Formatter 77
- How to select the overview ? 77
- PROGRAMMABLE FUNCTION KEYS 78
- Programmable Function Keys 79
- STANDARD SOURCE SET UP FILES 80
- 5976229 BARCOSLM G5 14032001 82
Related products and manuals for Projectors Barco SLM G5 Executive
Projectors Barco DP-1200 Installation Manual
(134 pages)
(134 pages)
Projectors Barco R9040006 Owner's Manual
(111 pages)
(111 pages)
Projectors Barco R9002321 Owner's Manual
(153 pages)
(153 pages)
Projectors Barco R9040355 User Manual
(6 pages)
(6 pages)
Projectors Barco R9040320 Owner's Manual
(155 pages)
(155 pages)
Projectors Barco R9040381 User Manual
(396 pages)
(396 pages)
Projectors Barco R9001890 User Manual
(87 pages)
(87 pages)
Projectors Barco R9001969 Owner's Manual
(127 pages)
(127 pages)
Projectors Barco R9001260 User Manual
(56 pages)
(56 pages)
Projectors Barco R9002249 Owner's Manual
(59 pages)
(59 pages)
Projectors Barco R9040355 Owner's Manual
(173 pages)
(173 pages)
Projectors Barco R9001760 User Manual
(57 pages)
(57 pages)
Projectors Barco R9827880 Owner's Manual
(149 pages)
(149 pages)
© 2020, manymanuals.com. All rights reserved. | 0.727 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals