Barco R9002327 Installation Manual download pdf (Page 49)

INSTALLATION ADJUSTMENTS

INSTALLATION ADJUSTMENTS

7-16

INSTALLATION ADJUSTMENTS

7-16

INSTALLATION ADJUSTMENTS

5975069A BARCOVISION 708 200498

5975069A BARCOVISION 708 200498

red crosshair

green crosshair

red crosshair

green crosshair

Move the red CRT

to the outside,

away from the

green CRT

Move the red CRT to-

wards the green CRT

Screws A, B, C and D (M4) : upper

fixation latch. nutdriver 7mm.

Screw A', B', C' and D' (M4) : lower

fixation latch. nutdriver 7mm.

These screws fasten the cooling

house of the red tube.

Pivot the red CRT until the center of the

red image coincides with the center of

the green image. If the angle of the red

CRT is corrected, tighten the four

bolts.

ENTER continues to blue and green

crosshairs.

EXIT will return to CRT projection angle

adjustment.

Loosen the four hexagon screws C, C',

D and D', upper and lower fixation latch.

CRT

PROJECTION ANGLE

ADJUSTMENT

Align crosshairs

<ENTER> continue

<EXIT> to return

red crosshair

green crosshair

red crosshair

green crosshair

Move the red CRT

to the outside,

away from the

green CRT

Move the red CRT to-

wards the green CRT

Screws A, B, C and D (M4) : upper

fixation latch. nutdriver 7mm.

Screw A', B', C' and D' (M4) : lower

fixation latch. nutdriver 7mm.

These screws fasten the cooling

house of the red tube.

Pivot the red CRT until the center of the

red image coincides with the center of

the green image. If the angle of the red

CRT is corrected, tighten the four

bolts.

ENTER continues to blue and green

crosshairs.

EXIT will return to CRT projection angle

adjustment.

Loosen the four hexagon screws C, C',

D and D', upper and lower fixation latch.

CRT

PROJECTION ANGLE

ADJUSTMENT

Align crosshairs

<ENTER> continue

<EXIT> to return

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 55

Comments to this Manuals

No comments